Anticorrosion low temperature resistance Wet Scrubber For Fume Treatment
Short Description:
As the ascending exhaust gas and descending absorbent are in constant contact in the packing layer, the concentration of solute in the ascending airflow is getting lower and lower, and when it reaches the top of the tower, it has reached the absorption requirements and is discharged out of the tower. On the contrary, the concentration of the medium in the descending liquid is getting higher and higher, and the process conditions are met when it reaches the bottom of the tower, and it is discharged outside the tower.
1. Packing
The packing in the tower can provide a large enough surface area to promote full contact of the gas phase:
It must have a larger specific surface area; a higher mass transfer rate; good moisturizing performance and conducive to uniform distribution of gas and liquid; better porosity, gas and liquid passing capacity and air flow resistance; high mechanical strength, corrosion resistance , Easy to clean but not easy to break.
2. Addition of medicine
(1) The name of the agent: add dilute sulfuric acid to the alkali absorption tower, add sodium hydroxide to the acid absorption tower
Reference Specifications
Related products
-
Direct Engagement Shaft Driven Centrifugal Fan ...
CQC energy-saving product certification The test of the fan complies with the GB19761-2009 national standard. The fan equipment can run continuously for 24 hours without damage, has a long service life, is energy-saving and efficient, and the whole unit is subjected to computer stress and strain analysis to improve the structural strength. Simple maintenance operation The use of an oil bath enclosed oil tank protects the bearings and shaft core from corrosive gas, pr...
-
Corrosion, explosion and static resistance Smok...
Lvyijing fan uses cutting-edge design concepts, uses PROE, CAD auxiliary systems for design, and uses internationally renowned brands of resin, glass fiber and other raw materials to make it with precise performance, stable operation, excellent quality and beautiful appearance. Lvyijing has changed the traditional medium and low pressure FRP fan outlet square mouth to a round mouth, which reduces the turbulence and noise of the fan outlet and improves the passage of ...
-
High Air Flow Rate Ventilation Fan
Product name: FRP High Pressure Fan Product Applying: FRP high pressure fan can be widely used in glass fiber manufacturing process, rare earth refining, chemical medicine, sewage deodorization, paper anaerobic, acid recycling and other environments containing high pressure corrosive gas. Features: 1. The wind pressure of the fan can reach 7000Pa, with a wide range of use and a variety of working conditions; High efficiency and energy saving (save electricity), for ...
-
Sound Insulation Tank For Reducing Noise
FRP Sound insulation fan is widely used, applicable to a variety of working conditions, efficient energy saving, save costs, to create profits for you. High performance, high efficiency, low vibration and low noise。Widely used in the extraction and exhaust of corrosive acid and alkali gas, waste gas treatment and purification, sewage deodorization, etc. (corrosive gas environment).
-
FRP Centrifugal Fan Blower Direct Motor
Excellent high temperature resistance The fan test meets the requirements of the GB/T13274-9 (-) fire protection code test standard, and it will not be damaged if it runs continuously for 24 hours under high temperature conditions. High efficiency and energy saving Using CAD, CFD and other series of analysis and research and development software, the fan efficiency is greater than 80%, and some machine numbers are greater than 85%, and the efficiency curve is flat, w...
-
Small Size Anti-corrosion Fan
Energy-saving and environmentally-friendly glass fiber reinforced plastic fans have their own research and development capabilities to improve your knowledge of fan technology, effectively eliminate faults, so that you can enjoy high-quality fans, and help you make faster and more correct purchase decisions. F4-72-AType FRP Centrifugal Fan (Direct Motor) is made of fiberglass composite material with reference to the performance pa...
