• hz

Ammonia Absorption Scrubber For Industrial Waste Gas Treatment

Short Description:

  • Type: Vertical Wet Scrubber
  • Brand: Lvran
  • Warranty: 1 Year
  • Application: Chemical Industry etc
  • Size: Customized and Multiple Models Supply
  • Material: PP/PE/FRP/Carbon Steel/Stainless Steel
  • Purified Rate: 70%-95%
  • Place of Origin: Zhejiang Province, China
  • After-sales Service Provided: Video technical support, Free spare parts, Online support
  • Air Flow: Customization
  • Weight: It Depends
  • Certification: ISO9001-2008/2015

  • 1

    Product Detail

    Product Tags

    PE Industrial Wet Scrubber For Acid Mist Purification  

    Equipment principle: For the treatment of corrosive gases (such as acid, alkaline waste gas), the choice of purification equipment is the key to use liquid to absorb the waste gas. At present, our company has independently developed the acid and alkaline waste gas purification process and equipment with high purification efficiency, simple operation and management, and long service life. The craft and the product has a simple structure, low energy consumption, the characteristics of high purification efficiency and applicable range, can effectively remove hydrogen chloride (HCl), hydrogen fluoride gas (HF), ammonia (NH3), fog (- H2SO4), chromium sulfate acid mist (CrO3), hydrogen cyanide acid gas(HCN), alkali vapor (NaOH), hydrogen sulfide gas(H2S), water-soluble gas such as formalin.

    The acid mist exhaust gas is discharged into the purification tower through the packing layer. The exhaust gas and the sodium hydroxide absorption liquid are in full contact, absorption and neutralization reaction. After the acid mist exhaust gas is purified, it is dehydrated and defogged by the mist removal plate and then discharged into the atmosphere by the fan. The absorbent liquid is pressurized by the pump at the bottom of the tower and sprayed on the top of the tower. The acid mist exhaust gas after purification meets the emission standard.

    Features: The equipment adopts packed tower to purify the exhaust gas, which is suitable for the treatment of continuous and intermittent exhaust gas discharging. Process, management, operation and maintenance is very convenient and simple, will not affect the production of the workshop; It also has a wide application range in Industry.

    Structure:This is a new one - piece forming scrubber tower. It is composed of liquid storage tank, tower body, air inlet section, spray layer, packing layer, swirl defogging layer, air outlet cone cap and inspection hole.

    Application: Purification and treatment of acid and alkaline waste gas discharged in the process of chemical industry, electronics, metallurgy, electroplating, textile (chemical fiber), food, machinery manufacturing and other industries. 

    PE molding scrubber advantages

    1, Raw material processing, anti-aging, anti-ultraviolet, , lifespan up to 15 years

    2, corrosion resistance, has more excellent low temperature performance than PP material (- 70 degrees), suitable for using in low temperature environment, modest prices, fast delivery

    3, mold production standardization, the tower body molding without welding, high strength, impact resistance, anti cracking, leakage 4, quick open Windows manhole is placed in the bottom spray tower, a fast slag removal function, simple maintenance and convenient

    The exhaust gas purification tower runs in gas-liquid countercurrent flow. The exhausted exhaust gas enters the tower body from the bottom inlet of the tower, passes through the packing layer from bottom to top, and is finally discharged from the outlet of the tower top pipe through the anti-corrosion fan. The neutralizing solution passes through the liquid distributor at the top of the tower, sprays it evenly into the packing layer, flows down the surface of the packing layer to the bottom of the tower, is discharged out of the tower by the pipeline, and is circulated by the anti-corrosion circulating pump. As the ascending exhaust gas and descending absorbent are in constant contact in the packing layer, the concentration of solute in the ascending airflow is getting lower and lower, and when it reaches the top of the tower, it has reached the absorption requirements and is discharged out of the tower. On the contrary, the concentration of the medium in the descending liquid is getting higher and higher, and the process conditions are met when it reaches the bottom of the tower, and it is discharged outside the tower.

    1

    Reference Specifications

    1
    8143737

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Fiberglass Backward Curved Centrifugal Exhasut Fan Blower

      Fiberglass Backward Curved Centrifugal Exhasut ...

      F4-72-AType FRP Centrifugal Fan (Direct Motor) is made of fiberglass composite material with reference to the performance parameters of metal 4-72-A centrifugal fan. This series of fans can transport corrosive gases containing acid, alkali and chemical components. The conveyed gas is not allowed to contain viscous substances, contained dust and hard particles (150m to m3, gas temperature ≤60℃, relative humidity ≤100%. This series of fans have high strength, light wei...

    • Carbon Steel Shaft Driven Draft fan

      Carbon Steel Shaft Driven Draft fan

      [Brief introduction] High temperature resistant carbon steel fan The high temperature carbon steel fan casing, entrance bell, and impeller are all pure FRP, completely changing the traditional carbon steel lined FRP production process. The connecting bolts of the casing and the iron frame adopt an integral molding and covering treatment method, which completely solves the phenomenon of bolt damage caused by corrosion. The fan adopts a double-layer base, no need to re...

    • Siemens Motor Centrifugal Fan

      Siemens Motor Centrifugal Fan

      Low Noise FRP Fan: It can be widely used in the exhausting of corrosive acid and alkali gas, waste gas treatment and purification, sewage deodorization and other environments containing corrosive gas. Details of Low Noise FRP Fan : 1. Low noise FRP fan has obtained the national explosion-proof qualification certificate and high-tech product certificate, fan casing, inlet bell, impeller are made of high density FRP, completely changed the traditional carbon steel lin...

    • Industrial Air Extraction Shaft-coupling centrifugal fan

      Industrial Air Extraction Shaft-coupling centri...

      Company's Business Scope: FRP centrifugal fan; PP fan; PVC fan; Laboratory fan; Energy-saving fan; High pressure blower; Explosion-proof fan; High temperature resistant fan, Stainless steel fan; Iron Steel fan, organic waste gas treatment equipments and related products. Applicable Industries: It be widely used mainly in electronics, semiconductor, pharmaceutical, chemical, food, non-ferrous metals, photovoltaic, new materials, new energy, chemical fiber, paper maki...

    • Anticorrosion low temperature resistance Wet Scrubber For Fume Treatment

      Anticorrosion low temperature resistance Wet Sc...

       As the ascending exhaust gas and descending absorbent are in constant contact in the packing layer, the concentration of solute in the ascending airflow is getting lower and lower, and when it reaches the top of the tower, it has reached the absorption requirements and is discharged out of the tower. On the contrary, the concentration of the medium in the descending liquid is getting higher and higher, and the process conditions are met when it reaches the bottom of...

    • Direct Engagement Shaft Driven Centrifugal Fan With Lagre Air FLow

      Direct Engagement Shaft Driven Centrifugal Fan ...

      CQC energy-saving product certification The test of the fan complies with the GB19761-2009 national standard. The fan equipment can run continuously for 24 hours without damage, has a long service life, is energy-saving and efficient, and the whole unit is subjected to computer stress and strain analysis to improve the structural strength. Simple maintenance operation The use of an oil bath enclosed oil tank protects the bearings and shaft core from corrosive gas, pr...